バイス HILMA.ZH

センタリングタイプ、油圧式、口金幅100 | 125 | 160 mm

ダウンロード

カタログ

取扱説明書

ラインアップ情報

Further information
HILMA.ZH - www.stark-roemheld.com/hilma-zh

Description

Concentric vise HILMA.ZH

concentric clamping
hydraulically operated, double acting

Concentric vises position and clamp workpieces under the influence of the outer contours exactly in a given symmetry axis. They can be used on machining centres, machines tools and machines for end machining as well as within special clamping fixtures.
Hydraulic clamping and unclamping is made by an external pressure transducer with a double-acting circuit. The synchronisation control adjusted free of play guarantees a high centring precision.

Special benefits

high repetitive clamping repeatability ± 0.02 mm
constant lengths and large clamping ranges
mounting position: any
fixing and mounting possibilities for customer-specific clamping jaws
protection against coolants and swarf by integrated wipers in the clamping slide
large slide stroke
opening stroke limitation by adjusting screw
suitable for the connection to the central lubrication with bed way oil VG 68 (please ask for information)

Designs
jaw widths 100, 125, 160 mm

アイテム番号	CADデータ	Typ	Betätigung	max. Spannkraft [kN]	Spannprinzip
アイテム番号 935420101	CADデータ	Typ HILMA.ZH	Betätigung hydraulisch	max. Spannkraft [kN] 16	Spannprinzip Zentrisch	プロパティ
アイテム番号 935420201	CADデータ /	Typ HILMA.ZH	Betätigung hydraulisch	max. Spannkraft [kN] 16	Spannprinzip Zentrisch	プロパティ
アイテム番号 935430101	CADデータ /	Typ HILMA.ZH	Betätigung hydraulisch	max. Spannkraft [kN] 25	Spannprinzip Zentrisch	プロパティ
アイテム番号 935430201	CADデータ /	Typ HILMA.ZH	Betätigung hydraulisch	max. Spannkraft [kN] 25	Spannprinzip Zentrisch	プロパティ
アイテム番号 935440101	CADデータ /	Typ HILMA.ZH	Betätigung hydraulisch	max. Spannkraft [kN] 40	Spannprinzip Zentrisch	プロパティ
アイテム番号 935440201	CADデータ /	Typ HILMA.ZH	Betätigung hydraulisch	max. Spannkraft [kN] 40	Spannprinzip Zentrisch	プロパティ

アクセサリー (3)

数

アイテム番号	CADデータ	商品の説明
アイテム番号 937772011	CADデータ /	商品の説明 Set of clamping claws (4 off) for jaw width 100 mm with socket head cap screws DIN 912 / M12x45 mm clamping height 24 mm as per data sheet WS1.300Z
アイテム番号 939174121	CADデータ /	商品の説明 Set of key blocks DIN 6323 (2 off) for T-slot 14 mm h6 as per data sheet WS1.300Z
アイテム番号 939174141	CADデータ /	商品の説明 Set of key blocks DIN 6323 (2 off) for T-slot 18 mm h6 as per data sheet WS1.300Z

Application examples

Hydraulically-operated concentric vise HILMA.ZH

Two concentric vises "HILMA.Z 160 H" in automatic mode of machine for machining of ends. The next workpiece is ready (top right in the figure), it will be fed by the gripper (above the workpiece being machined), after the previous workpiece was placed to the left. Optimised clamping jaws allow the machining of different components without jaw change.
The fully automated plant is in unattended operation.

Hydraulically-operated concentric vise HILMA.ZH

Three hydraulically-operated concentric vises "HILMA.Z 100 H" on a machine for machining of ends. The fully automated plant is in unattended operation. Workpiece-specific jaws clamp different diameters to the always same centre.