Built-in elements

pistons and threaded bushings complete
with seals for block cylinders,
double acting, max. operating pressure 500 bar

Downloads

Catalogue sheet

EN ES FR

Operating instructions

EN ES FR

Information Series

Description

B 1.5401 Built-in elements

Built-in elements are directly integrated in the fixture body. Such created cylinders can be used as push or pull cylinders. Built-in elements are used on fixtures with narrow spaces, and for applications where mounted standard clamping elements limit the machining space or impede swarf flow.

The built-in elements consist of piston and threaded bushing. The piston is inserted into the location hole of the fixture. Then the built-in bushing is screwed into the fixture body. The bushing is let-in flush to the housing. Tightening of the threaded bushing is made with a pin-type face spanner. Sealing with minimum leakage at the piston rod is obtained by two independent sealing steps. In addition, a wiper protects against contamination. Sealing in the fit hole is made by an O-ring / back-up ring combination.

Products (60)

Number

Item no.	CAD data	type	stroke [mm]	functioning	stroke end cushioning
Item no. 0154110	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties
Item no. 0154111	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties
Item no. 0154310	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties
Item no. 0154311	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties
Item no. 0154410	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties
Item no. 0154411	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties
Item no. 0154510	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties
Item no. 0154511	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties
Item no. 0154610	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties
Item no. 0154611	CAD data	type built-in element	stroke [mm] -	functioning double acting	stroke end cushioning without	Properties

Accessories (52)

Number

Item no.	CAD data	Description
Item no. 3614072	CAD data	Description Swivel contact bolt M8 x 8 mm ball - flat face Ø 7.2 mm admissible load 10 kN as per data sheet G3.800
Item no. 3614073	CAD data	Description Swivel contact bolt M10 x 10 mm ball - flat face Ø 10.5 mm admissible load 25 kN as per data sheet G3.800
Item no. 3614074	CAD data	Description Swivel contact bolt M12 x 12 mm ball - flat face Ø 10.5 mm admissible load 25 kN as per data sheet G3.800
Item no. 3614075	CAD data	Description Swivel contact bolt M16 x 16 mm ball - flat face Ø 20 mm admissible load 90 kN as per data sheet G3.800
Item no. 3614091	CAD data	Description Contact bolt M12 x 12 mm with coupling pin max. 350 bar, as per data sheet G3.800
Item no. 3614118	CAD data	Description Swivel contact bolt M12 x 12 mm ball - serrated face Ø 10.5 mm admissible load 25 kN as per data sheet G3.800
Item no. 3614119	CAD data	Description Swivel contact bolt M16 x 16 mm ball - serrated face Ø 20 mm admissible load 90 kN as per data sheet G3.800
Item no. 3614131	CAD data	Description Swivel contact bolt M8 x 8 mm ball - serrated face Ø 7.2 mm admissible load 10 kN as per data sheet G3.800
Item no. 3614194	CAD data	Description Swivel contact bolt M10 x 10 mm ball - serrated face Ø 10.5 mm admissible load 25 kN as per data sheet G3.800
Item no. 3614228	CAD data	Description Swivel contact bolt M6 x 6 mm ball - flat face Ø 7.2 mm admissible load 10 kN as per data sheet G3.800